2 Functions of Devices in DVP-PLC next time, M1029, M1030, M1036 and M1037 will turn “Off” and “On” again when the execution is completed. 3. API 63 INCD: M1029 will be “On” for a scan period when the assigned group numbers of data are compared. 4. API 67 RAMP, API 69 SORT: a) When the execution of the instruction is completed, M1029= On. You have to reset M1029. b) M1029 turns “Off” when the instruction is “Off”. 5. API 155 DABSR, API 156 ZRN, API 158 DRVI, API 159 DRVA for EH2/SVEH3/SV2 series MPU: a) M1029 = On when the 1 st output group Y0 and Y1 of EH2/SVEH3/SV2 is completed. M1030 = On when the b) M1036 = On when the 3 rd output group Y4 and Y5 of EH2/SV is completed.
M1037 = On when the 4 th output 2 nd output group Y2 and Y3 is completed. group Y6 and Y7 is completed. c) When the instruction is re-executed for the next time, M1029 or M1030 will turn “Off” and “On” again when the execution is completed. 6. In API 57 PLSY, API 156 DZRN, API 158 DDRVI and API 159 DDRVA for SC series MPU: M1102 will be set On when Y10 pulse output is completed. M1103 will be set On when Y11 pulse output is completed. After PLSY instruction is disabled,M1102 and M1103 will be set Off. In DDRVA, DDRVI and DZRN, M1102 and M1103 will be set Off when next time these instructions are enabled. Function Group Communication Error Code Number M1025, D1025 Contents:
When HPP, PC or HMI is connected to the PLC and the PLC receives illegal communication request during the transmission of data, M1025 will be On and the error code will be written in D1025. See the error codes below. 01: Illegal instruction code 02: Illegal device address 03: Requested data exceed the range 07: Checksum error Function Group Clear Instruction Number M1031, M1032 Contents: M1031 (clearing non-latched area) , M1032 (clearing latched area) DVP-PLC Application Manual 2-77 Device No.
Cleared Device M1031 Contact status of Y, general-purpose M and general-purpose S General-purpose contact and timing coil of T General-purpose contact, counting coil reset coil of C General-purpose present value register of D M1031 General-purpose present value register of T General-purpose present value register of C