Delta Electronics DVS — 3.13.1.3 LLDP TLV Options

Chapter 3 Featured Functions 3.13.1.3 LLDP TLV Options You can configure LLDP type-length value (TLV) settings for each interface in this page. 3-117 Description Factory Default Link Status This field displays the status of the interface link. Up or Down Admin Status Specify the status and direction of the interface:  TX: The interface processes outgoing traffic only.  RX: The interface processes incoming traffic only.  TX and RX: The interface processes both incoming and outgoing traffic.  Disabled: The interface is disabled. TX and RX Notification Status Specify the notification status:  Enabled: Notifications are sent.  Disabled: Notifications are not sent.

Disabled Item Description Port Specify the interface number. Port Description Specify whether to send the options in LLDP frames.  Enable: The information is transmitted. This is the default setting.  Disable: The information is not transmitted. System Name System Description System Capability MAC PHY Config Management Address