Delta Electronics DVS — 3.2.1.2 Trap Configuration

Chapter 3 Featured Functions Notice: The client address and client IP mask denote a range of IP addresses from which SNMP clients can access the community on the switch. 3.2.1.2 Trap Configuration If network engineers need to get information from an SNMP agent (network device), they usually use SNMP software to poll information and get a response from an agent. But the SNMP Trap is the unsolicited trap which sends from agent to the NMS (Network Management System) 3-33 Description Factory Default Client IP Mask Enter the client’s IP mask. All addresses allow accesses that are associated with a single client IP address.

For example, the client’s IP address is 192.168.1.X, subnet mask is 255.255.255.0. If the client’s IP address is between 192.168.1.0 and 192.168.1.255, they are allowed to be accessed. If the client’s IP address is 192.168.1.15 and subnet mask is 255.255.255.255, only this client allows to be accessed. 0.0.0.0 Access Mode Specify the access mode:  ReadOnly: Only allow the client to read information.  ReadWrite: Only allow the client to read information and modify configuration. None