Delta Electronics DVS — 3.10.2 MAC Rules

DVS Series Managed Industrial Ethernet Switches User’s Manual VLAN 3-78 Description Factory Default Match Every Specify whether all packets need to match the rule:  True: All packets need to match the rule. Other rules are not considered, and the fields to the right of the Match Every field are disabled.  False: Not all packets need to match the rule. Other rules are also considered. True Destination MAC Specify the MAC address of the destination device that needs to be compared with the information in a packet. Enter a MAC address in the xx:xx:xx:xx:xx:xx format. None Destination MAC Mask Specify the MAC mask that is associated with the destination MAC address.

The MAC mask specifies which bits in the destination MAC address need to be compared with the information in a packet. Note: Use zeros and F in the MAC mask. A zero means that the bit is not checked, and an F in a bit position means that the data needs to be equal to the value given to that bit. For example, if the MAC address is aa:bb:cc:dd:ee:ff, and the mask is 00:00:ff:ff:ff:ff, all MAC addresses with xx:xx:cc:dd:ee:ff result in a match (where x is any hexadecimal number). None EtherType Key Specify the EtherType that needs to be compared with the information in a packet:

Appletalk, ARP, IBM SNA, IPv4, IPv6, IPX, MPLS multicast, MPLS unicast, NetBIOS, Novell, PPPoE, Reverse ARP, User Value. If you select User Value, enter the value in the EtherType User Value field. None EtherType User Value If you select User Value from the EtherType Key drop-down list, enter the value, which is a number in the range of 1536 to 65535. None Source MAC Specify the MAC address of the source device that needs to be compared with the information in a packet. Enter a MAC address in the xx:xx:xx:xx:xx:xx format. None Source MAC Mask As an option, specify the MAC mask that is associated with the source MAC address.

The MAC mask specifies which bits in the source MAC address need to be compared with the information in a packet. Note: Use zeros and Fs in the MAC mask. A zero means that the bit is not checked, and an F in a bit position means that the data needs to be equal to the value given to that bit. For example, if the MAC address is aa:bb:cc:dd:ee:ff, and the mask is 00:00:ff:ff:ff:ff, all MAC addresses with xx:xx:cc:dd:ee:ff result in a match (where x is any hexadecimal number). None