Delta Electronics DVS — 3.10.3 MAC Binding Configuration

Chapter 3 Featured Functions 3.10.3 MAC Binding Configuration When you bind a MAC ACL to an interface, all rules that you have defined for the MAC ACL are applied to the interface. MAC Binding Configuration Interface Binding Status 3-79 Description Factory Default Specify the VLAN ID that needs to be compared with the information in a packet. Enter a number in the range of 0 through 4095. You cannot enter a VLAN range. Note: Most VLAN configurations on the switch are in the range of 1 to 4093. However, an ACL can detect a VLAN in the range of 0 to 4095. None Setting Description ACL ID Select an ACL ID to bind MAC. Direction The Direction drop-down list is fixed at Inbound.

Only incoming packets can be filtered. Sequence Number Enter a number in the range of 1 to 4,294,967,295. Port Select one or more interfaces by clicking the square or click for the second time to clear the interface. LAG Select one or more LAG by clicking the square or click for the second time to clear the interface. Setting Description Interface The interface to which the MAC ACL is bound. Direction The packet filtering direction for the MAC ACL. The only valid direction is Inbound, which means the MAC ACL rules are applied to traffic entering the interface. ACL Type The type of ACL to which the interface is bound. This is a fixed field that always shows MAC ACL.

ACL ID The name of the ACL to which the interface is bound.