Kendrion Kuhnke Automation GmbH CAM Creator 7.3.5.4 Link Used to define the project's online links. Choose between CAN and EtherCAT by ticking the appropriate Select box. CAN Parameter: Sets the CAN transfer rate The transfer rate needs to be set to allow the FIO CAM Control module to operate in a CANopen network. The transfer rate you set in this dialog will be stored in the module when you open the project. To program FIO CAM Control module: Choose the baud rate your FIO CAM Control module has been set to, e.g. 250,000 bps. To use the FIO CAM Control module in a CANopen network: Choose the baud rate your CANopen network has been set to. EtherCAT Parameter:
Click on the Info icon to see which index no. has been allocated to the Ethernet port you wish to use on your PC. Kuhnke FIO CAM Control ( E 808 GB ) 35 11/10/2017