EA180 Series Servo Drive Users Manual Chapter 4 Display and Operation 4.1 Appearance of display and buttons M S 88888 EA180-8R4-3B 01020052111410280001 Drive model & S/N LED display Mode UP DOWN Shift Enter 42 Part names Sign Function description Mode M Switch between different operating modes Exit current parameter/function operation Exit from Al mode to normal operating mode UP ˄ Increase current cursor value Forward jog when AF-02 auxiliary function is in at level 2 Directly display the first level of next parameter when d5 and CG modes are at level 2 Switch downward to view the fault information when there is a fault in Al mode Switch between AF-07 parameter selection and drive state in St mode DOWN ˅ Decrease the current cursor value Reverse jog when AF-02 auxiliary function is in at level 2 Switch upward to view the fault information when there is a fault in Al mode Directly display the first level of previous parameter when d5 and CG modes are at level 2 Shift Move the cursor rightward when d5 , Pr and AF modes are at level 1 ( > ); Move the cursor leftward when d5 and AF modes are at level 2 ( Enter S Confirm the current operation LED LED0 43210 LED1 LED2 LED3 LED4 jIdt The information in the box is the LED display content; 120 on the box indicates that the corresponding LED flashes.
beneath the box indicates that the lower right point of the corresponding LED flashes. -. 11 If the lower right dot "." of LED4 is on, it indicates that the current data is the second screen of the current information, and you can switch between the two screens with SHIFT button. -.
11 13011 The LED4 symbol "-" indicates that the current data is negative (the number of bits on current screen ≤ 4); The lower right dots ".." of LED4 and LED3 are on, it indicates that the current data is negative (the number of digits on current screen = 5); 13011 If the lower right dot "." of LED4 flashes and that of LED3 is on, it indicates that the current data is the second screen of the current information, and you can switch between the two screens with SHIFT button, and the current data is negative. 120 When digits are displayed, the lower right dots "." of LED3, LED2, and LED1 indicate the decimal point position of the current parameter.
If the lower right dot "." of LED0 flashes, it indicates that a fault or warning occurs.