Driver Assist Features Smart Speed Control Once activated, when the vehicle is driving on a highway or overpass under Adaptive Cruise Control, it will alert you to change the speed limit when a change is detected in the road speed limit. You can manually confirm to keep the cruising speed consistent with the current road speed limit. Go to the Settings page from the control bar at the bottom of the central display, and click NIO Pilot > Smart Speed Control to turn this function on or off. Warning Intelligent Speed Control is only a supplement to, and does not function as a substitute for, your visual observation.
Never rely solely on the speed limit information recognized by Traffic Sign Recognition. When the speed of the vehicle exceeds the speed limit of the road, you will be visually alerted of overspeed. Warning • As a driving assist feature, Intelligent Speed Control cannot handle all situations in all traffic, weather and road conditions. You must always pay attention to traffic and road conditions, and make your own decision on whether to use Traffic Sign Recognition and Intelligent Speed Control if it is safe. • Currently, Intelligent Speed Control does not work in complex road conditions such as ramps.
• You always bear the ultimate responsibility for driving safely and complying with applicable traffic laws and regulations. • Intelligent Speed Control combines the speed limit information from the map to display the speed limit information on the digital instrument cluster. No speed limit information will be displayed when no speed limit information source is available from the map. 288