Emergency Measures Jump Starting When the vehicle cannot start because the 12V battery level is low, you can jump start the vehicle by connecting the jumper cable to the 12V battery of another vehicle. Caution • When jump starting a vehicle, make sure the two vehicles are not in contact with each other. Otherwise, the current generated when the positive terminals of the 12V batteries on the two vehicles are connected will damage the vehicle. • Connect the positive terminals first, and then the negative terminals. To avoid short circuits or other damage, we recommend you observe the following procedure when you jump start the vehicle: 1.
Put the vehicles in PARK, cut off the power supply of the 12V battery, make sure the jumper cable is correctly connected to the vehicle electrical system, and open the trunk cover of Vehicle A with lower battery level to find the 12V battery. 2. Connect one end of the red cable to the positive (+) terminal on the 12V battery on Vehicle A. 401