Nio — Jump Starting

Emergency Measures 3. Connect the other end of the red cable to the positive (+) terminal of the 12V battery on Vehicle B. 4. Connect one end of the black cable to the negative (-) terminal on the 12V battery of Vehicle B. 5. Connect the other end of the black cable to a proper earthing point of the 12V battery on Vehicle A. 6. Start Vehicle B and let it run for a few minutes. Then, start Vehicle A to check whether it can start up normally. 7. After Vehicle A starts up normally, power off Vehicle B, remove the jumper cables in the opposite order they were connected, and stow all equipment. 402