EWM1000plus EWM2000evo EWM3000new (*) In most cases, this time is sufficient to check the heating. However, the time can be increased by repeating the phase without draining the water: for a moment to a different phase of the diagnostics cycle and then back to the heating control phase (if the temperature is higher than 80°C, heating does not take place). (**) See tables of following pages. (1) Models with Display. QUICK GUIDE AND APPLIANCES LIST 25/176 599 72 40-80 10 Reading/cancelling last alarm Alarm code 11, 12 ...24 All LEDs light in sequence. Pressing a button the corresponding LED lights (and the Buzzer sounds, if featured)