electrolux WM-WD — Electrolux WM-WD — руководство по ремонту (EN)

In case of burning on the main circuit board, check that the problem is not caused by another electrical component (short-circuits, poor insulation, water leakage). Refer to the figures below in order to identify the component that might have caused the burning according to the position of the burned area. QUICK GUIDE AND APPLIANCES LIST 599 72 40-80 ENV06 EWM11xx EWM21xx EWM25xx/35xx 3.22 Burning on the circuit boards EWM25xx/35xx WM/WD 1. Power supply 2. Relay FCV (motor) 3. Heating element (WM) / WD board power supply 4. Drain pump 5. Door safety interlock 1. Power supply 2. Relay FCV (motor) 3. Heating element (WM) / WD board power supply 4. Drain pump 5. Door safety interlock 6.

Drum light circuit 7. Water inlet solenoids 8. NTC temperature sensor washing 9. Analogic sensor 10. Drum positioning (top-loaders) 11. Flowmeter 12. Circulation pump and door switch 13. Communication FCV board 14. Weight sensor circuit 15. Communication WD board 16. Communication LCD