In case of burning on the main circuit board, check that the problem is not caused by another electrical component (short-circuits, poor insulation, water leakage). Refer to the figures below in order to identify the component that might have caused the burning according to the position of the burned area. The circuit board shown below is the version with the greatest number of components: other boards may not feature all these components. QUICK GUIDE AND APPLIANCES LIST 599 72 40-80 ENV06 EWM11xx EWM21xx EWM25xx/35xx 3.23 Burning on the circuit board WD 1. Power supply 220V~ (Line Door) 2. Washing heating element 3. Thermostat with manual reset 4. Thermostat with automatic reset 5.
Drying heating element 1 1. Power supply 220V~ (Line Door) 2. Washing heating element 3. Thermostat with manual reset 4. Thermostat with automatic reset 5. Drying heating element 1 6. Drying heating element 2. 7. Fan motor 8. Humidity NTC sensor 9. Drying NTC temperature sensor 10. Communication with main board