10.7 Heating 2 NTC temperature sensor 13 Heating element (with thermal fuses) 14 PCB K1 Relay 1. Tubular casing 2. Thermal fuses 3. NTC Sensor 4. Connectors The heating element is powered by a relay (K1) of the electronic board and is provided with two thermal fuses, which interrupt if the temperature degree exceeds the values by which they are calibrated. WARNING In case of replacement of the heater, replace it with one with the same characteristics in order not to compromise the safety of the appliance. 10.8 Temperature sensor The temperature is controlled by the PCB by means of a NTC temperature sensor incorporated in the heating element . 1. NTC resistor 2. Metallic capsule 3.
Terminals 4. Plastic casing SOI/DT 2007-11 dmm 46/69 599 70 39-88 TEMPERATURE (ºC) RESISTANCE (Ω) Nominal value Maximum value Minimum value 20 60 80 6050 1250 640 6335 1278 620 5765 1222 660