electrolux EWM1100 — Electrolux EWM1100 — руководство по ремонту (EN)

Tests to be performed: Switch the appliance on and turn the programme selector to every position. Wait 10 seconds at each position before passing to the next one. Does alarm E82 reappear? YES YES Replace the circuit board and restart the diagnostic cycle to check for further alarm conditions. Replace the circuit board and restart the diagnostic cycle to check for further alarm conditions. SI 2007-10 SOI/DT-mdm FCPD-dp Quality-fz 49/59 599 70 32-47 E82: Error in reading the RESET/OFF position of the programme selector E82 E82 Reading of position “0” of the selector when the appliance is switched on, or configuration error Switch the appliance OFF (selector position “0”). Do any LEDs light?

NO NO Restart the diagnostic cycle to check for further alarm conditions.