BYD dolphin — Charging Precautions

connector terminal does not get loose or deformed. ● Hold the charging connector, align the connector with the charge port and push it in, making sure that they are properly connected. ● The signs refer to standardized charging systems in accordance with DIN EN 62196. ● Removing the charging connector at the end of charging: ● Stop charging first and make sure the charge port is unlocked. Charging Precautions ● Pull the charging connector. ● When the SOC bar on the instrument cluster turns red, the high-voltage battery is about to be exhausted. Please charge it immediately, otherwise the service life of the high- voltage battery will be reduced.

● Do not force the charging connector out while the charge port is locked, otherwise the charge port may be damaged. 04 ● Charging Precautions USING AND DRIVING ● Mode 2 charging means charging with an AC charging connector that complies with local standards. Use a dedicated AC line and power outlet that meets local standards. The purpose of using a dedicated line is to protect the line from tripping due to line breakage or high-power charging of the high-voltage battery. Using a line other than dedicated lines may affect proper operation of other devices on the line. ● The A/C can be used as normal while the vehicle is being charged.

To ensure the charging power, it is recommended not to turn on the A/C. ● It is recommended that no one stay in the vehicle during charging. ● It is recommended to park the vehicle in a ventilated area during charging. ● The vehicle system automatically stops charging when the high-voltage battery is fully charged. The charge port is equipped with an electronic lock. Unlock it before unplugging the charging equipment. ● Avoiding damage to the charging equipment (precautions for charging equipment): ● Prevent the charging equipment from suffering any mechanical impact. ● To stop DC charging, turn off the charger before disconnecting the charging connector.

In Mode 2 charging, remove the charging connector and then the power plug. ● Do not place the charging equipment near heaters or other heat sources. ● Inserting the charging connector before charging: ● When charging is complete and the charging connector is unplugged, make sure that the charge port's cap and door are closed, otherwise water or foreign materials may enter the port and affect its normal use. ● Make sure that the charging connector and charge port are free of foreign objects, and that the protective cap of the charging 71