BYD dolphin — Charging Precautions

● Before starting the vehicle, ensure that the charging equipment is disconnected. The locking mechanism can damage the charging equipment and the vehicle if the vehicle is started with the charging connector incorrectly inserted. ● In case of high-temperature high- power DC charging, the performance of battery temperature control system may be affected by the A/C in the passenger compartment, and the charging performance may degrade, resulting in an extended charging time. To ensure charging efficiency, it is recommended to keep the A/C off during charging. ● Battery temperatures that are too low or too high compromise vehicle charging performance.

● The temperature control system can improve low-temperature charging capacity of the battery. Due to output capacity limitations of charging piles, the charging time is extended, the heating time becomes longer, and the power consumption of heating is increased. These are normal phenomenons. ● When the heating or cooling function is enabled during charging, it is normal that both charging time and power consumption increase slightly. ● During charging, battery cooling may start, and the compressor, fan and other components work when necessary. It is normal that there will be some noise under the hood.

● For faster low-temperature DC charging, charging from low SOC is recommended because, due to the low battery temperature, the charging current is small for vehicles with high SOC in low-temperature environments. ● During charging, the estimated remaining time to full charge is displayed on the instrument cluster. It is normal that the remaining time to full charge may vary slightly depending on the temperatures, SOC, and charging facilities. ● To improve your experience, it is recommended to charge the vehicle immediately after using it, as the battery is relatively hot and has better charging performance.

● If the charge port door is frozen due to weather or other reasons, do not force it open. REMINDER ● Turning A/C on during low- temperature charging affects the performance of battery temperature control system and charging performance. ● If the charging connector cannot be removed after unlocking, try a few more unlocking attempts. If that does not work, try emergency unlocking. For the operating procedure, see "Emergency Unlocking of the Charge Port" in "Charge Port Anti- theft Lock". ● It is normal that when the battery temperature control system is working during charging, the charging power displayed on the instrument cluster may fluctuate temporarily.

● To unlock the charge port after DC charging, press the unlock button twice within three seconds for the operation to be successful. ● Before charging is complete, battery equalization is activated for longer battery life and thus the charging time may be longer. 72