BYD dolphin — General Charging Troubleshooting

REMINDER ● See the charging instructions for specific charging precautions. General Charging Troubleshooting Fault Possible Cause Solution The high-voltage battery has been fully charged. When the high-voltage battery is fully charged, the charging will stop automatically. High-voltage battery temperature is too high or too low. Keep the vehicle in an environment with appropriate temperature and charge it when the temperature becomes normal. 04 Charger is connected, charge starts, but battery will not charge. Low-voltage battery over-discharges. Replace the low-voltage battery. USING AND DRIVING Charging equipment fails.

If it is verified that the charging equipment's power indicator is working properly, or that there are no other unusual indications, change the charging equipment or contact the charging equipment supplier. Vehicle display fails. Verify that there is a charging system fault message on the instrument cluster, then stop the charging. It is recommended to contact a BYD authorized dealer or service provider. AC grid outage Charging will automatically restart when the power grid is restored. Charging cable is not connected properly. Verify that the charging connection cable is not loosely connected. Charging connection switch is pressed.

If the charging connection switch is pressed, the charging will stop. The charging connection should be connected again to start charging. Charging stops midway. High-voltage battery temperature is too high. Charging stops automatically if the high-voltage battery overheating warning light comes on on the instrument cluster. Charge the vehicle when the battery temperature returns to a normal level. Vehicle or charging pile fails. If there is any fault prompt for the charging pile or the vehicle, it is recommended to contact a BYD authorized dealer or service provider. 73