● Open the hood. A lock latch can be found inside. Pull the latch to unlock the charging connector. CAUTION ● Before V2L discharging, ensure that the load is turned off. WARNING ● Do not touch any metal terminal of the discharging socket or vehicle charge port during discharging. ● Stop discharging immediately if there are any abnormalities such as peculiar smell and smoke. REMINDER 04 In the event of abnormality or function failure, contact a BYD authorized dealer or service provider. ● See "Charging Instructions" for safety warnings. ● Store the product in a cool and dry place when it is not in use.
USING AND DRIVING External Discharging ● When discharging, do not place the equipment in the trunk, under the front of the vehicle, or near the tires. ● This vehicle features a vehicle to load (V2L) function. ● When using the equipment, prevent it from getting rolled over by the vehicle, dropped, or trampled on. REMINDER ● The V2L function is recommended only when SOC is high. ● Never drop the equipment or pull it directly by its cable. Take caution when moving the equipment. ● The V2L function is restricted when the vehicle SOC is low.
● Never use the charging equipment if the power strip cable becomes soft, the discharging connector cable is worn out, the insulation layer is cracked, or any other damage occurs. CAUTION ● For precautions concerning use of the discharge connection device*, please refer to item 3 (precautions for charging equipment) in "Charging Precautions". ● Never use the equipment when the discharging connector or power strip is disconnected or broken, or when there is any sign of surface damage. ● Before discharging, please confirm the vehicle SOC and estimate the remaining driving range. 81