User Manual EM303B General Purpose Inverter Output Current Figure 7-23 Overload Pre-alarm Control Logic TIme 8.9.2 Analog Output Scale Analog ADT function can monitor present analog value of analog input terminal and output alarming signal. Analog ADT Options F7-04Analog ADT Options: Options of analog ADT input terminals F7-05Analog ADT1: Analog ADT input scale. Select and adjust analog ADT input scale and the input signal percentage of analog input terminal. F7-06Analog ADT1Hysteresis: Options of input scale hysteresis of analog ADT1. For instance:
If F7-04=2, F7-05=25.00, F7-06=5.00, and if input voltage of analog input terminal VF>2.5V (10V4=2, F7-05=25.00, F7-06=5.00, and if input voltage of analog input 130 Overload Detection Scale Overload Detection Time verload Time ction Start Enabled Time er Status Delay Stop Time Run Stopping Process Stop Overload Detection Time verload ction Start Enabled er Status Run No. Function Range Unit Default Type Analog ADT Options 0: VS 0.00～100.00% 1: IS 0.00～100.00% 2: VF 0.00～100.00% 3:
IF 0.00～100.00% 2 〇 F7-04 F7-05 Analog ADT1 0.00～100.00 % 20.00 ● Analog ADT1 Hysteresis 0.00～100.00 (Monotonic decreasing is active) % 5.00 ● F7-06 F7-07 Analog ADT2 0.00～100.00 % 50.00 ● Analog ADT2 Hysteresis 0.00～100.00 (Monotonic decreasing is active) % 5.00 ● F7-08 F7-09 Analog ADT3 0.00～100.00 % 80.00 ● Analog ADT3 Hysteresis 0.00～100.00 (Monotonic decreasing is active) % 5.00 ● F7-10