User Manual EM303B General Purpose Inverter 6.2.2 F1 Group: Motor Parameters 55 No. Function Range Unit Default Type S/N Motor Type 0: AC induction motor 1:
Not used 0 〇 32 F1-00 F1-01 Motor Rated Power 0.40~480.00 kW XXXX 〇 33 F1-02 Motor Rated Voltage 60~660 V XXX 〇 34 F1-03 Motor Rated Current 0.1~1500.0 A XXXX 〇 35 F1-04 Motor Rated Frequency 20.00~600.00 Hz XXXX 〇 36 F1-05 Motor Rated Speed 1~60000 rpm XXXX 〇 37 Motor Wiring Mode 0：Y 1：Δ X 〇 38 F1-06 F1-07 Motor Rated Power Factor 0.50~0.99 X 〇 39 F1-08 Idling Excitation Current I0 0.1~1500.0 A XXXX 〇 40 F1-09 Rated Torque Current 0.1~1500.0 A XXXX × 41 F1-10 Stator Resistance R1 0.001~60.000 Ω XXXX 〇 42 F1-11 Rotator Resistance R2 0.001~60.000 Ω XXXX 〇 43 Stator& Rotor Leakage Inductance Ls 0.1~3000.0 mH XXXX 〇 44 F1-12 Stator& Rotor Mutual Inductance Lm 0.1~3000.0 mH XXXX 〇 45 F1-13 F1-14 Motor Efficiency 30.0~99.0 XXX 〇 46 Autotuning Parameters 0:
No autotuning 1: Stationary autotuning 2: Rotational autotuning 0 〇 47 F1-15 Inverter Address 1～247, 0: Broadcasting Address 1 〇 48 F1-16 Communication Bit Rate 0: 4800 1: 9600 2: 19200 3: 38400 bps 1 〇 49 F1-17 Communication Parity Mode 0: No parity 1+8+1 for RTU 1: Even parity 1+8+1+1 for RTU 2: Odd parity 1+8+1+1 for RTU 0 〇 50 F1-18 Master-slave Communication Mode 0: The inverter is the slave 1:
The inverter is the master 0 〇 51 F1-19 Receiving Address of Slave Inverter 0:Primary Numeric Frequency (F0-07) 1:Auxiliary Numeric Frequency( F9-06) 0 〇 52 F1-20 Inverter Receiving Proportion Coefficient 0.00~600.00 % 100.00 ● 53 F1-21 F1-22 Analog Input Gain K1 0.00~600.00 % 100.00 ● 54 F1-23 Analog Input Gain K2 0.00~600.00 % 0.00 ● 55 F1-24 Analog Input Gain K3 0.00~600.00 % 100.00 ● 56