EM500 Open-Loop Vector Control Inverter User Manual Xi Input On Off Positive Logic Sampling Enabled Disabled 有效 无效 Enabled Disabled Reverse Logic Sampling 反逻辑采样 无效 有效 Figure 7-7 Terminal Positive and Negative Logic Sampling 0: enabled when the multi-function input terminal is on, disabled when the multi-function input terminal is off; 185 121 External Signals Of Material supply disruptions Winding application-specific function, used to provide Material supply disruptions external input function, when the Material supply disruptions detection for the external signal and the terminal is closed (Satisfy the constraints) reported E43 error.
122 Winding traverse Detection Signal Winding application-specific function, Used to provide cable detection function, when the Winding traverse detection signal valid time or invalid time time-out that reported E44 error. 123 Braking Reset Terminals Winding application-specific function, When the brake output is active, the brake output can be reset by closing the terminal. No. Function Range Unit Default Type F02.15 Positive/Negat ive Logic 1 of Numeric Input Terminal D7 D6 D5 D4 D3 D2 D1 D0 *00 00000 〇 * X7 X6 X5 X4 X3 X2 X1 0: Positive Logic, Enabled at On/Disabled at Off 1:
Negative Logic, Disabled at On/Enabled at Off F02.16 Positive/Nega tive Logic 2 of Numeric Input Terminal D7 D6 D5 D4 D3 D2 D1 D0 000 00000 〇 X11 X10 X9 X8 AI4 AI3 AI2 AI1 0: Positive Logic, Enabled at On/Disabled at Off 1: Negative Logic, Disabled at On/Enabled at Off