EM500 Open-Loop Vector Control Inverter User Manual F10.17 - F10.31 are used to define the data sent from the communication expansion card (i.e., received by inverter) and are generally parameter setting; F10.32 - F10.46 are used to define the data received by the communication expansion card (sent by inverter) and are generally status parameters. All the exchange data should correspond to these functions codes or the defined fields of the virtual addresses and not be manually set.
Refer to communication expansion card instructions.All the exchange data correspond to the function codes or the virtual address definition areas respectively (refer to Communication Protocol) and user does not need to set them manually. Refer to corresponding manuals of communication expansion cards.
258 PZD11 F10.27 Received Data Type PZD12 F10.28 Received Data Type PZD13 F10.29 Received Data Type PZD14 F10.30 Received Data Type PZD15 F10.31 Received Data Type PZD16 F10.32 Sent Data Type PZD2 F10.33 Sent Data Type PZD3 F10.34 Sent Data Type PZD4 F10.35 Sent Data Type PZD5 F10.36 Sent Data Type PZD6 F10.37 Sent Data Type PZD7 F10.38 Sent Data Type PZD8 F10.39 Sent Data Type PZD9 F10.40 Sent Data Type PZD10 F10.41 Sent Data Type PZD11 F10.42 Sent Data Type PZD12 F10.43 Sent Data Type PZD13 F10.44 Sent Data Type PZD14 F10.45 Sent Data Type PZD15 F10.46 Sent Data Type PZD16 65535 〇 65535 〇 65535 〇 65535 〇 65535 〇 65535 〇 65535 〇 65535 〇 65535 〇 65535 〇 65535 〇 65535 〇 65535 〇 65535 〇 65535 〇 65535 〇 65535 〇 65535 〇 65535 〇 65535 〇