sinee — 7.11 F10 Group: Communication Function Parameter

EM500 Open-Loop Vector Control Inverter User Manual corresponding function codes to current expansion card. This function code is used to determine the delay response time of communication card after master sends data to communication card. When selecting a communication expansion card, CANopen or DeviceNet, user needs to set the bit rates for the communication between the expansion card and the bus. When the selected expansion card is Profibus-DP, user needs to set the communication format. Please refer to the expansion card manual for details 257 No. Function Range Unit Default Type F10.15 Bit Rate of Communication between Expansion Card and Bus Ones Place: CANopen 0: 125K 1: 250K 2:

500K 3: 1M Tens Place: DeviceNet 0: 125K 1: 250K 2: 500K 23 〇 No. Function Range Unit Default Type F10.16 PROFIBUS Communication Format 0: PPO1 1: PPO2 2: PPO3 3: PPO4 4: PPO5 × No. Function Range Unit Default Type F10.17 Received Data Type PZD2 65535 〇 F10.18 Received Data Type PZD3 65535 〇 F10.19 Received Data Type PZD4 65535 〇 F10.20 Received Data Type PZD5 65535 〇 F10.21 Received Data Type PZD6 65535 〇 F10.22 Received Data Type PZD7 65535 〇 F10.23 Received Data Type PZD8 65535 〇 F10.24 Received Data Type PZD9 65535 〇 F10.25 Received Data Type PZD10 65535 〇 F10.26 Received Data Type 65535 〇