EM500 Open-Loop Vector Control Inverter User Manual 324 The basic parameters (motor parameters need to be set manually, and do the motor parameters of static autotuning) F00.02 Command Source Options 1: Terminal Control 1: Terminal Control 1: Terminal Control 1: Terminal Control F00.03 Terminal Control Mode Options 0: Terminal RUN for running, 0: Terminal RUN for running, 0: Terminal RUN for running, 0: Terminal RUN for running, F00.04 Main Frequency Source A Options 1: AI1 given 0: Numeric given 1: AI1 given 1: AI1 given F00.05 Auxiliary Frequency Source B Options 10: Process PID 10: Process PID 10:
Process PID F00.06 Frequency Source Options 6:Auxili ary Frequency Source B+ Feedforwa rd arithmetic (Winding application ) 6:Auxilia ry Frequency Source B+ Feedforwar d arithmetic (Winding application ) 6:Auxiliar y Frequency Source B+ Feedforwar d arithmetic( Winding application ) F00.07 Numeric Frequency Setting 75.00Hz F00.14 Acceleration Time 1 1.00s 1.00s 70.00s 1.00s F00.15 Deceleration Time 1 1.00s 1.00s 70.00s 1.00s F00.16 Maximum Frequency 75.00Hz 75.00Hz 75.00Hz 50.00Hz F00.18 Upper Limit Frequency 75.00Hz 75.00Hz 75.00Hz 50.00Hz