sinee — 11.4.2Communication Card Configuration

EM500 Open-Loop Vector Control Inverter User Manual Table 11-1 Cable for Braking Unit and Braking Resistor Flexible cable has better flexibility. Since cable may contact high-temperature device during use, it’s better to use copper core or heat-proof flexible cable or fire-retardant cable. Braking unit and inverter should be as close as possible to each other, and it’s better to keep their distance no more than 2 m, otherwise DC side cable should be twisted and sheathed with magnetic ring to reduce radiation and inductance. The length of the cable between inverter and braking unit should be less than 2m. The length of the cable between braking unit and braking resistor can be more than 2m.

11.4 Option Card 11.4.1 I/O Expansion Card Configuration I/O expansion card is used for the expansion of inverter control terminal. Specific model of I/O card is listed in Table 11-2. Table 11-2 Model List of I/O Card 11.4.2Communication Card Configuration EM500 inverter is equipped with multiple communication expansion cards. Models of expansion cards are listed in Table 11-3. Table 11-3 Models of Communication Expansion Cards 374 Model No. Average braking current Peak current I (A) max Section of copper core I (A) av cable (mm2) BR100-045 45 75 10 BR100-160 75 150 16 BR100-315 120 300 25 Model No.

Description Terminal Function EC-IO-A1 I/O Expansion Card 4 numeric multi-function digital signal inputs: X8 - X11 1 numeric signal output: Y3 1 analog signal input: AI4 EC-IO-A3 I/O Expansion Card 3 1 relay output (NO): Y3 1 temperature input: T1/T2 1 power supply: +15Vdc Model No. Description Communication Rate EC-CM-C1 CANopen Communication Card 125 kbps, 250 kbps, 500 kbps and 1 Mbps EC-CM-D1 DeviceNet Communication Card 125 kbps, 250 kbps and 500 kbps EC-CM-P1 Profibus-DP Communication Card Bit rate self-adaptation