EM500 Open-Loop Vector Control Inverter User Manual 13.6 Illustrate 1) The inverter is running forward (Assuming that the fault is a slave device Error) Illustrate: 422 04H Slave device failure An unrecoverable error occurred while attempting to perform a requested operation on the slave (drive).
Possible cause A logical error or a write EEPROM failure 05H Data out of range The data received by the slave (inverter) exceeds the minimum to maximum range of the corresponding register 06H Parameters are read-only The current register is read-only and can not be written 07H Parameters can not be changed during operation The inverter is running, the current register can not be written to, if you need to operate, please stop 08H Parameters are password protected The current register is password protected Identifiers Control Date Field Field Send 0x401 04 70 00 00 01 Response 0x47F 02 01 00 Response (abnormal ) 0x4FF 02 01 04