sinee — Ⅵ.2 Installation Instructions

EM500 Open-Loop Vector Control Inverter User Manual Appendix Ⅵ Air Compressor Expansion Card (EC-CM-D1) Ⅵ .1 General The EC-IO-K2 card is used for EM500 series inverter control terminal expansion, which contains the following resources: Ⅵ .2 Installation Instructions  Please install the IO expansion card in the EC-A expansion slot (note the  Please remove IO expansion card in case of inverter power is completely installation is correct and snap in place). off.

拧紧此处M3*8组合螺钉 Figure 5 IO expansion card installation diagram 442 Item Specification Description Input 1 digital input JT1 / JT2 fixed for emergency stop 3 analog signal inputs T1 + / T1- and T2 + / T2- can be connected to the PT100 for temperature detection P + / P- is a current signal of 0 ~ 20mA for air pressure detection Output 2-way digital signal outpu BJ1 / BJ2 fixed for alarm t JZ1 / JZ2 fixed for loading valve control