EM500 Open-Loop Vector Control Inverter User Manual Align the I / O expansion card with the expansion slot interface and positioning holes, with screws. Figures of real objects are as follows: 1 6 2 5 4 3 Elevation Back Elevation 1. Output relay 2. Relay output terminal 3. Digital signal input interface 4. Analog input interface 5. Screw positioning hole 6. Inverter interface Ⅵ .3 Expansion Terminal Function Table 12 IO Expansion Card Terminal Function 443 Terminal Type Terminal name Terminal function description label Digital input JT1 Emergency stop terminal As the emergency stop switch is pressed it is open circuit, so inverter emergency stop effective as defaulted.
JT2 Digital output BJ1 Alarm output terminal Relay output terminal BJ2 JZ1 Load the output terminals Relay output terminal JZ2 Analog input P+ Air pressure detection input P + / P-, respectively, then positive and negative current-type pressure sensor two paragraphs, measuring range 0 ~ 20mA P- T1+ Oil temperature detection PT100 sensor input