EM500 Open-Loop Vector Control Inverter User Manual 83 Running at Present Speed) 33: Not Used 34: Count Input (≤250Hz) 35: High-Speed Count Input (≤100kHz, Only Enabled for X7) 36: Counter Clear 37: Length Count Input (≤250Hz) 38: High-Speed Length Count Input (≤100kHz, Only Enabled for X7) 39: Length Clear 40: Pulse Input (≤100kHz, Only Enabled for X7) 41: Process PID Pause 42: Process PID Integral Pause 43: PID Parameter Switch 44: PID Positive/Negative Action Switch 45: Stop and DC Brake 46: DC Brake at Stop 47: Immediate DC Brake 48: Fastest Coast-To-Stop 49: Not Used 50: External Stop 51: Switch Main Frequency Source to Numeric Frequency Setting 52:
Switch Main Frequency Source to AI1 53: Switch Main Frequency Source to AI2 54: Switch Main Frequency Source to AI3 55: Switch Main Frequency Source to High-Frequency Pulse Input 56: Switch Main Frequency Source to Communication Setting 57: Inverter Enabled 58-78: Not Used 79: Remote Start 80: Power Frequency Conversion 81-88: Not Used 89: Feedforward Reset