EM600 High-Performance Vector Control Inverter User Manual 100 Function Name of Function Parameter Description Unit Default Property Code Code Synchronous Motor Model F14.23 Initial Electric Angle of Synchronous Motor 0.0 - 359.9 (Synchronous motor enabled) 〇 F14.24 Encoder Type 0: ABZ Incremental Encoder 1: UVW Incremental Encoder 2: UVW Wire-Saving Encoder 3: Not Used 4: Rotary Transformer 0 〇 F14.25 Encoder Line Number 1 - 65535 1024 〇 F14.26 Phase Angle of Zero Pulse of Encoder 0.0 - 359.9° 0.0 〇 F14.27 AB Pulse Phase Sequence 0: Forward 1: Reverse 0 〇 F14.28 Phase Sequence of UVW Encoder 0: Forward 1:
Reverse 0 〇 F14.29 UVW Initial Offset Phase Angle 0.0 - 359.9° 0.0 〇 F14.30 Rotary Transformer Pole-Pairs 1 - 65535 1 〇 F14.31 Not Used F14.32 Speed Feedback Disconnection Detection Time 0.0 - 10.0 (0.0: Speed Feedback Disconnection Detection Disabled) 0.0 〇 F14.33 Filter Time of Speed Feedback 0.000 - 0.100 s 0.002 〇 F14.34 Motor Parameter Autotuning 0: No Autotuning 1: Stationary Autotuning of Induction Motor 2: Rotational Autotuning of Induction Motor 3: Not Used 11: Stationary Autotuning of Synchronous Motor 12: Rotational Autotuning of Synchronous Motor 13: Autotuning of Encoder of Synchronous Motor 0 〇 F14.35 Drive Control Mode of Motor 2 0: V/F control (VVF) 1:
Sensorless Vector Control (SVC) 2. Feedback Vector Control (FVC) 0 〇 F14.36 Speed Proportional 0.00 - 100.00 12.00 ●