EM600 High-Performance Vector Control Inverter User Manual F00.06=1: Auxiliary Frequency Source B Final setting frequency is only determined through auxiliary frequency source B. F00.06=2: Main and Auxiliary Arithmetic Results Final setting frequency is determined through main and auxiliary arithmetic results (refer to F00.08). F00.06=3: Switching between Main Frequency Source A and Auxiliary Frequency B Final setting frequency is determined through input function “26: Frequency Source Switching”. If input function is disabled, final setting frequency is determined by main frequency source A; if input function is enabled, final setting frequency is determined by auxiliary frequency source B.
F00.06=4: Switching between Main Frequency Source A and Main & Auxiliary Arithmetic Results Final setting frequency is determined through input function “26: Frequency Source Switching”. If input function is disabled, final setting frequency is determined by main frequency source A; if input function is enabled, final setting frequency is determined by main and auxiliary arithmetic results. See F00.08 for details. F00.06=5: Switching between Auxiliary Frequency Source B and Main & Auxiliary Arithmetic Results Final setting frequency is determined through input function “26: Frequency Source Switching”.
If input function is disabled, final setting frequency is determined by the auxiliary frequency source A; if input function is enabled, final setting frequency is determined by main and auxiliary arithmetic results. See F00.08 for details. F00.07 is used to set numeric frequency, with its maximum value limited by maximum frequency (F00.16). As for main and auxiliary arithmetic, final results are limited by both lower limit frequency (F00.19) and upper limit frequency (F00.18). F00.08=0:
Main Frequency Source A + Auxiliary Frequency Source B Main and auxiliary arithmetic result is the sum (main frequency source A + auxiliary frequency source B); the result can be either a positive figure or a negative number. For example, the arithmetic result of 20.00 Hz (forward) and 40.00 Hz (reverse) is 20.00 Hz (negative). 125 Function Name of Function Parameter Description Unit Default Property Code Code F00.07 Numeric Frequency Setting 0.00 Hz - Maximum Frequency Hz 50.00 ● Function Name of Function Parameter Description Unit Default Property Code Code F00.08 Main and Auxiliary Arithmetic 0: Main Frequency Source A + Auxiliary Frequency Source B 1:
Main Frequency Source A - Auxiliary Frequency Source B 2: The Bigger of Main A and Auxiliary B 3: The Smaller of Main A and Auxiliary B 0 〇