EM600 High-Performance Vector Control Inverter User Manual Parameters above are mainly used to adjust the gain of various setting sources (refer to Figure 7-3). Both main frequency source A and auxiliary frequency source B have setting gain; there is synthetic gain by combination with selected function code F00.06. Final setting is limited by analog adjustment quantity, upper limit frequency and lower limit frequency.
Synthesis (including F00.06) Main frequency source A Setting (including F00.04) Main frequency source gain F00.10 Analog quantity adjustment of synthetic Auxiliary frequency source B setting (including F00.05) frequency F00.13 Auxiliary frequency source gain F00.11 Figure 7-3 Frequency Source Setting Control (Gain Description) Action mode of function codes about gain (F00.10 - F00.12) is “multiply”, i.e., “Setting=Former setting * gain”. The following will describe analog quantity adjustment of synthetic frequency (F00.13). F00.13=0: Synthetic Frequency of Main and Auxiliary Channels Synthetic frequency is directly set by synthetic frequency of main and auxiliary channels. F00.13=1:
AI1* Synthetic Frequency of Main and Auxiliary Channels F00.13=2: AI2* Synthetic Frequency of Main and Auxiliary Channels F00.13=3: AI3 * Synthetic Frequency of Main and Auxiliary Channels F00.13=4: AI4 (Expansion Card) * Synthetic Frequency of Main and Auxiliary Channels Synthetic frequency is determined through “AI (percentage) * Synthetic Frequency of Main and Auxiliary Channels”. F00.13=5: High-Frequency Pulse (PULSE) * Synthetic Frequency of Main and Auxiliary Channels Synthetic frequency is determined through “HDI (percentage) * Synthetic Frequency of Main and Auxiliary Channels”. Please refer to the description of F00.04 for detailed explanations of AI1-AI4 and X7.
F00.04 has the same meanings as AI1-AI4 and X7. 100.00% is the percentage inputted through Synthetic Frequency of Main and Auxiliary Channels. Acceleration time refers to the time required for output frequency going from 0.00Hz to acceleration/deceleration reference frequency Fbase, or the time required for output 127 Function Name of Function Code Parameter Description Unit Default Property Code Auxiliary Channels 5:
High-Frequency Pulse (PULSE) * Synthetic Frequency of Main and Auxiliary Channels Synthetic gain of main and auxiliary frequency source F00.12 imit Function Name of Function Parameter Description Unit Default Property Code Code F00.14 Acceleration Time 1 0.00 - 650.00 (F15.13=0) 0.0 - 6500.0 (F15.13=1) 0 - 65000 (F15.13=2) s 15.00 ● F00.15 Deceleration Time 1 0.00 - 650.00 (F15.13=0) 0.0 - 6500.0 (F15.13=1) 0 - 65000 (F15.13=2) s 15.00 ●