sinee — 7.4 F03 Group: Output Terminal Function Parameter

EM600 High-Performance Vector Control Inverter User Manual Function i Output Active Inactive Level Output Active Inactive Inactive Active Monopulse Output Figure 7-14 Numeric Output Terminal Level and Monopulse Output Numeric output terminals Y1 and Y2, and relay output terminals R1 and R2 have two output types, level and monopulse (see Figure 7-14). For level output, function terminal’s output status is consistent with its function status; for monopulse output, active level of certain pulse width can be outputted only when the function is enabled. This function code is of bit operation type. For specific settings, please refer to table 7-5 of the description part for F02.15.

Pulse Output Width 无效 Pre-Output Active Inactive 预输出 有效 Positive Logic 正逻辑输出 Output Active Level Inactive Level 有效电平 无效电平 Active Level Inactive Level Reverse Logic 反逻辑输出 Sampling 无效电平 有效电平 Figure 7-15 Positive and Negative Logic Output of Numeric Output Terminal According to design, numeric multi-function output terminal status has two output logics: 0: Positive logic, if the function is on, multi-function output terminal outputs active level; if the function is off, multi-function output terminal outputs inactive level. 1: Negative logic, if the function is on, multi-function output terminal outputs inactive level; if the function is off, multi-function output terminal outputs active level.

This function code is of bit operation type. For specific settings, please refer to table 7-5 of F02.15. ★ This function is used for matching with the logic of other peripherals. Actual level: Y1/Y2, default active level is low level; default actual level of R1/R2 is high level. 154 F03.05 Output Signal Type D7 D6 D5 D4 D3 D2 D1 D0 *0000 〇 * * * * R2 R1 Y2 Y1 0: Level 1: Monopulse Function Name of Function Code Parameter Description Unit Default Property Code F03.06 Positive/Negative Logic of Numeric Output D7 D6 D5 D4 D3 D2 D1 D0 00000 〇 * * * Y3 R2 R1 Y2 Y1 0: Positive Logic, Enabled at On/Disabled at Off 1: Negative Logic, Disabled at On/Enabled at Off