sinee — 7.9 F08 Group: Preset Speed and Simple PLC Parameter

EM600 High-Performance Vector Control Inverter User Manual Attentions: ★ At preset speed running, inverter start/stop is determined by function code F00.02. ★ At preset speed running mode, inverter acceleration/deceleration time can be controlled by external terminal set as acceleration/deceleration time. Direction at preset speed running is controlled by terminals F/R and RUN. In addition to preset speed function, inverter also has simple PLC function, which provides four control modes. See Table 7-11 for details. Table 7-11 PLC Running Mode ★ Inverter starts judgment from run time of the 15 th preset speed (F08.48) to the first preset speed.

A function code not set as 0 is last preset speed.

180 Preset Preset Preset Preset Preset Speed Speed Corresponding Speed Speed Set Frequency Speed Terminal Terminal Function Code Terminal 4 Terminal 1 3 2 10 Enabled Disabled Disabled Enabled Preset Speed 9 F08.08 11 Enabled Disabled Enabled Disabled Preset Speed 10 F08.09 12 Enabled Disabled Enabled Enabled Preset Speed 11 F08.10 13 Enabled Enabled Disabled Disabled Preset Speed 12 F08.11 14 Enabled Enabled Disabled Enabled Preset Speed 13 F08.12 15 Enabled Enabled Enabled Disabled Preset Speed 14 F08.13 16 Enabled Enabled Enabled Enabled Preset Speed 15 F08.14 Function Name of Function Parameter Description Unit Default Property Code Code F08.15 Simple PLC Running Mode 0:

Stop after Single Running 1: Stop after Limited Times of Cycles 2: Run at Last Preset Speed after Limited Times of Cycles 3: Continuous Cycle 0 ● F08.16 Limited Times of Cycles 1 - 10000 1 ● F08.15 Description 0 Inverter stops after running at last preset speed. 1 Run circularly; the cycle times is set through F08.16; inverter stops after the cycles are complete. 2 Run circularly; the number of cycle times is set through F08.16; after having completed the running at last preset speed, inverter keeps running at last preset speed until a stop command is received. 3 Run continuously and circularly until a stop command is received.