EM600 High-Performance Vector Control Inverter User Manual EM600 inverter has a kilowatt-hour meter function (refer to description of F18.18 and F18.19). User may set present function code as 1 to clear present count. By setting this parameter as 1, user may reset all parameters except motor parameter (F01 group), inverter parameter, manufacturer parameter, power-on time (F12.15/16) and running time (F12.17 and F12.18). ★ : This operation is irreversible. Please pay enough attention while operating. F12.15 and F12.16 are used together to view accumulated power-on time from inverter manufacture until now (as per the time that inverter is powered on).
This value will be accurate to 1 minute, and up to about 65,536 hours (about 7.5 years). If F12.15=50 and F12.16=33, it means that accumulated power-on time of inverter is 2 days 2 hours and 33 minutes. ★ These parameters are used for viewing only and can not be operated or cleared. F12.17 and F12.18 are used together to view accumulated power-on time from inverter manufacture until now (as per the time that inverter runs). This value will be accurate to 1 minute, and up to about 65,536 hours (about 7.5 years). If F12.17=47 and F12.18=39, it means that accumulated power-on time of inverter is 1 day 23 hours and 39 minutes.
★ These parameters are used for viewing only and can not be operated or cleared. These function codes are used to view rated power, rated voltage and rated current of inverter. ★ These parameters are used for viewing only and can not be operated. 206 Function Code Name of Parameter Description Unit Default Property Function Code F12.14 Reset 0: No Operation 1:
Reset (exclusive of motor parameter, inverter parameter, manufacturer parameter, running and power-on time record) 0 〇 Function Name of Function Code Parameter Unit Default Property Code Description F12.15 Accumulated Power-On Time h 0 - 65535 h 0 × F12.16 Accumulated Power-On Time min 0 - 59 min 0 × Function Parameter Description Name of Function Code Unit Default Property Code F12.17 Accumulated Running Time h 0 - 65535 h 0 × F12.18 Accumulated Running Time (min) 0 - 59 min 0 × Function Name of Function Code Parameter Unit Default Property Code Description F12.19 Inverter Rated Power 0.40 - 650.00 kW Up To Specific Model × F12.20 Inverter Rated Voltage 60 - 690 V Up To Specific Model × F12.21 Inverter Rated Current 0.1 - 1500.0 A Up To Specific Model ×