sinee — 7.14 F13 Group: Torque Control Parameter

EM600 High-Performance Vector Control Inverter User Manual F12.32=0 : Mode 0. Switching LED display and LCD (7 Lines) function code display is set by F12.04 – F12.08. The selected function codes refer to the parameter description. F12.32=1 : Mode 1. Switching LED display and LCD (7 Lines) function code display is set by F12.33 – F12.37. For example, if 18.00 is set it means that the function code is F18.00. Default display (3 lines) is 3 function codes for monitoring F18.00, F18.06 and F18.09. LCD display 3 lines switchs to LCD display 7 lines. Related operations please refer to the LCD keypad manual. Monitor mode please refer to chapter 4.

When UP/DOWN is enabled and F12.41=0 UP/DOWN will reduce inverter output frequency to0 and not reverse. If 12.41=1 UP/DOWN will reduce inverter output frequency to 0 and can reverses. 7.14 F13 Group: Torque Control Parameter F13.00=0: Speed Control The control mode is speed input type, with frequency as input quantity. F13.00=1: Torque Control Input control mode is torque input, with the percentage of motor rated torque current as the input quantity; it is only enabled when inverter is in SVC control or FVC control mode, i.e., when F00.01=1 or 2; in FVC control mode, the squirrel-cage induction motor can achieve torque control to replace AC induction torque motor directly.

Final control mode is also related to “29: Torque Control Disabled” and “28: Switch between Speed Control and Torque Control”. See corresponding description. Table 7-18 Final Control Mode of Inverter 208 Function Name of Function Code Parameter Description Unit Default Property Code F12.38 LCD display parameter 1 0.00~99.99 18.00 ● F12.39 LCD display parameter 2 0.00~99.99 18.06 ● F12.40 LCD display parameter 3 0.00~99.99 18.09 ● ENTER ESC Function Name of Function Code Parameter Description Unit Default Property Code F12.41 UP/DOWN cross zero option 0:forbidden 1:allowed 0 〇 Function Name of Function Parameter Description Unit Default Property Code Code F13.00 Speed/Torque Control 0:

Speed Control 1: Torque Control 0 〇 29: Torque Control 28: Switch between Speed Final Control F13.00 F13.00 Disabled Control and Torque Control Mode