EM600 High-Performance Vector Control Inverter User Manual physical terminal, but they all have positive/negative logic function. VY1 - VY4 have delay function, with the same terminal status confirmation method; they can be set respectively. An example is given to VY1 in the following part. If F17.28=xxxxxxx0, VY1 status and X1 input status are the same. Status of VY1 is synchronized with actual input status X1. This application can be used for status confirmation and one switch motion can be used for realizing programming of multiple functions, etc. If F17.28=xxxxxxx1, status of VY1 is determined by F17.19. Status of virtual output terminal is determined by set status.
Such output is mainly used for soft programming. For example, we can output signal of “19: PID Feedback Upper Limit Reach” via VY1 (F17.19=19), and collect the signal via VX1 (F17.00=41), in order to control PID via function code “PID Feedback Upper Limit Reach”. These function codes are used to display present virtual terminal status in real time. 7.19 F18 Group: Monitoring Parameter This group of parameters can be used for viewing present status of inverter, but can not be used to operate them. 227 Function Name of Function Code Parameter Description Unit Default Property Code F17.28 Virtual Output Terminal Control D7 D6 D5 D4 D3 D2 D1 D0 000 00000 〇 VY8 VY7 VY6 VY5 VY4 VY3 VY2 VY1 0:
To be determined by status of X1 – X7. 1: To be determined by output function status. Function Name of Function Code Parameter Description Unit Default Property Code F17.37 Virtual Input Terminal Status VX8 VX7 VX6 VX5 VX4 VX3 VX2 VX1 000 00000 × 0: Disabled 1: Enabled F17.38 Virtual Output Terminal Status VY8 VY7 VY6 VY5 VY4 VY3 VY2 VY1 000 00000 × 0: Disabled 1: Enabled Function Code Name of Parameter Description Unit Function Code O F18.00 F utput requency Display present output frequency. Range: 0.00 - Upper Limit Frequency ★ This parameter will be updated in real time only when inverter is in speed control mode. Hz F18.01 S et Frequency Display present set frequency. Range:
0.00 - Maximum Frequency F00.16 ★ This parameter will be updated in real time only when inverter is in speed control mode. Hz