sinee — 7.19 F18 Group: Monitoring Parameter

EM600 High-Performance Vector Control Inverter User Manual 228 Function Name of Parameter Description Unit Code Function Code F18.02 PG Feedback Frequency This function is used to display PG feedback frequency, when inverter is under FVC control mode or other control modes with the feedback encoder. Range: 0.00 – Upper Limit Frequency. ★ This parameter will be updated only when a PG card is equipped. Hz F18.03 Estimated Feedback Frequency Used to display estimated feedback frequency when inverter is in SVC control. Range: 0.00 - Upper Limit Frequency. ★ This parameter will be updated in real time only when inverter is in SVC control.

Hz F18.04 Output Torque Display present output torque of inverter. Range: -200.0 - 200.0. % F18.05 Torque Setting Display present set torque of inverter. Range: -200.0 - 200.0. ★ This parameter will be updated in real time only when inverter is under torque control mode. % F18.06 Output Current Display present output current of inverter. According to motor rated power ratings: 0.00 - 650.00 (Motor Rated Power ≤ 75kW) 0.0 - 6500.0 (Motor Rated Power >75kW) A F18.07 Output Current Percentage Display present output current in the form of percentage (relative to inverter rated current). Range: 0.0 - 300.0. % F18.08 Output Voltage Display present output voltage. Range: 0.0 - 690.0.

V F18.09 DC Bus Voltage Display present bus voltage. Range: 0 - 1200. V F18.10 Simple PLC Running Times When auxiliary frequency source B is involved in setting (F00.06≠0), by setting “11: Simple PLC” (F00.05=11) and simple PLC running mode is “Limited Times of Cycles” (F08.15=1/2), inverter will display present running times; “0” means that it is the first time, “1” means that it has finished the first time and is running for the second time, and so on. Range: 0 - F08.16. F18.11 Simple PLC Running Stage When auxiliary frequency source B is involved in setting (F00.06≠0), by setting “11: Simple PLC” (F00.05=11), inverter will display present running PLC running stage. Range:

1-15, which correspond to preset speed 1 (F08.00) –15 (F08.14) respectively. F18.12 PLC Running Time of Present Stage When auxiliary frequency source B is involved in setting (F00.06≠0), by setting “11: Simple PLC” (F00.05=11), inverter will display present running PLC running stage. Range: 0.0 – Corresponding Time Setting (for example time of preset speed is determined by F08.20). s/min F18.13 Not Used F18.14 Load Speed Display present load peed. For normal display, please set rpm