EM600 High-Performance Vector Control Inverter User Manual their distance no more than 2 m, otherwise DC side cable shall be twisted and sheathed with magnetic ring to reduce radiation and inductance. Lengths of cable among braking unit, braking resistor and inverter are illustrated in Figure 11-1: 大于2m More than 2m Figure 11-1 Cable Length 11.4 Option Card 11.4.1 I/O Expansion Card Configuration I/O expansion card is used for expanding inverter control terminal. Specific model of I/O card is listed in Table 11-2. Table 11-2 Model of I/O Card 11.4.2 PG Card Configuration EM600 inverter is equipped with multiple general PG cards. User shall select PG card based on encoder output form.
Models of PG cards are listed in Table 11-3. Table 11-3 Model List of PG Card 247 Inverter 变频器 小L于ess 2m Braking 制动 u单nit 元 than 2m Braking 制动 r电esist阻or Model No. Description Terminal Function EC-IO-A1 Expansion Card 4 numeric multi-function signal inputs: X8 - X11 1 numeric signal output: Y3 1 analog signal input: AI4 Model No. Description Encoder interface EC-PG-O1 open collector output encoder complementary push-pull output encoders encoder with voltage output 6PIN connection terminal EC-PG-O2 open collector output encoder complementary push-pull output encoders encoder with voltage output With frequency dividing output and PG output is open collector. Input:
6PIN connection terminal Output: 4PIN connection terminal EC-PG-D1 Differential output encoder (long line drive encoder) Wire-saved UVW differential output encoder 9PIN connection terminal EC-PG-D3 Differential output encoder (long line drive encoder) Wire-saved UVW differential output encoder With frequency dividing output and PG output is open collector. Input: 9PIN connection terminal Output: 4PIN connection terminal EC-PG-U1 UVW differential output encoder DB15 female connector EC-PG-R1 Rotary transformer output encoder DB9 female connector