sinee — EM730 User Manual

User Manual of EM730/EM730E Series Inverter F13.01=0: digital torque setting F13.02 The torque depends on F13.02. F13.01=1:AI1 F13.01=2:AI2 The torque is dependent on AI (percentage) * F13.02. F13.01=5: High-frequency pulse input (X5) The torque depends on HDI (percentage)*F13.02. meaning. 100.00% is the percentage to the set value of F13.02 (digital torque setting). For the details of AI1-AI2 and X5, refer to the F00.04 description. They have the same F13.01=6: communication setting The torque depends on the communication and the like.

 If the master-slave communication (F10.05=1) is enabled and the inverter works as the slave (F10.06=0), the specific feedback percentage is “700FH (master-slave communication setting) * F10.08 (slave receiving proportional coefficient)”, and the 700FH data range is -100.00% to 100.00%, as detailed in Table 12-31. For the general communication (F10.05=0), the specific setting percentage is “7003H (torque communication setting) * F13.02 (digital torque setting)”, and the 7003H data range is -200.00% to 200.00%, as detailed in Table 12-31. F13.01=8:

digital potentiometer setting 246 Function Function code Default Parameter description Unit Attribute code name setting F13.01 Options of torque setting source 0: digital torque setting F13.02 1: AI1 2: AI2 3: retention 4: retention 5: high frequency pulse input (X5) 6: Communication setting (Full range of the items 1-6, corresponding to F13.02 digital torque setting) 7: retention 8: digital potentiometer setting 0 〇 F13.02 Digital torque setting -200.0 to 200.0 (100.0 = the rated torque of motor) % 100.0 ●