sinee — EM730 User Manual

User Manual of EM730/EM730E Series Inverter F16.00=0: general model Since the inverter is a general-purpose product, relevant functions for each application should not be enabled. F16.00=1: water supply application Since the inverter is a PID-regulated constant-pressure water supply control product, a clock option can be provided for clock pressure setting. F16.00=2: Air compressor application Since the inverter is a dedicated PID-regulated control product for air compressors, an air compressor interface option can be provided for PT100 automatic temperature calculation and the like. F16.00=3:

Winding application The inverter is a dedicated PID-regulated control product for winding and unwinding. F16.00=4: Fan application The inverter can be used to configure the parameters of the corresponding function code for the fan application macro. F16.00=5: Machine tool spindle application The inverter can be used to configure the parameters of the corresponding function code for the application micro of machine tool spindle. F16.00=6: Extruder application the extruder application macro. The inverter can be used to configure the parameters of the corresponding function code for F16.00=7:

High-speed motor application The inverter can be used to configure the parameters of the corresponding function code for the high-speed motor application macro. function code, F12.14 will be executed automatically to restore the default settings, After the corresponding application macro is selected by changing the and the parameters will be restored the macro-specific parameters. 266 6: Extruder application 7: High-speed motor application