User Manual of EM730/EM730E Series Inverter Set the total cumulative running time. If the cumulative running time (F12.17) reaches or exceeds the total cumulative running time (F16.08), please contact the agent for maintenance. ★ After this parameter is set, the inverter may fail to work normally. Be careful to set this parameter. Factory password. ★ After this password is set, the inverter may fail to work normally. Be careful to set this password. The analog output is set as the offset of count and length output. Analog output F16.11 F16.10 Fig.
7-17 Schematic Diagram of Analog Output of Count and Length 0 F16.01/F16.03 Count/length 7.18 Virtual I/O Function Parameter Group of F17 Group The standard EM730/EM730E series inverter is equipped with eight virtual multi-function 271 Function Default Function code name Parameter description Unit Attribute code setting F16.08 Setting of cumulative running arrival time 0-65535; 0:
disable the protection when the running time is up h 0 〇 Default setting Function code Function code name Parameter description Unit Attribute F16.09 Factory password 0 - 65535 XXXXX ● Function Function code Default Parameter description Unit Attribute code name setting F16.10 Analog output percentage corresponding to the count value 0 0.00-100.00 % 0.00 〇 F16.11 Analog output percentage corresponding to the set count value 0.00-100.00 % 100.00 〇