User Manual of EM730/EM730E Series Inverter 7.20 F19 protection record parameter group These parameters are used only to view the types of recent three protections of the inverter and the inverter status in protection. They cannot be changed. The function codes related to the last protection are as follows: 279 motor F18.37 ~ F18.38 Reserved F18.39 VF separation target voltage Display the VF separation target voltage in a real-time manner. Scope: 0.0 to rated voltage of the motor V F18.40 VF separation output voltage Display the actual output voltage of VF separation in a real-time manner. Scope:
0.0 to rated voltage of the motor V F18.41 ~ F18.50 Reserved F18.51 PID output -100.0 - 100.0 % F18.60 Inverter temperature -40 to 200 ℃ F18.67 Cumulative energy saving MWH 0 - 65535 MWh F18.68 Cumulative energy saving KWH 0.0 - 999.9 kWh F18.69 High cumulative cost saving (*1000) 0 - 65535 F18.70 Low cumulative cost saving 0.0 - 999.9 F18.71 Power-frequency power consumption MWH 0 - 65535 MWh F18.72 Power-frequency power consumption KWH 0.0 - 999.9 kWh Function code Function code Default Parameter description Unit Attribute name setting F19.00 Category of last protection Display the type of the last protection, as detailed in Table 0 ×