User Manual of EM730/EM730E Series Inverter 68 F00.12 Synthetic gain of main and auxiliary frequency sources 0.0～300.0 % 100.0 ● F00.13 Analog adjustment of synthetic frequency 0: synthetic frequency of main and auxiliary channels 1: AI1 * synthetic frequency of main and auxiliary channels 2: AI2 * synthetic frequency of main and auxiliary channels 3: retention 4: retention 5:
High frequency pulse (PULSE) * synthetic frequency of main and auxiliary channels 0 〇 F00.14 Acceleration time 1 0.00 - 650.00 (F15.13=0) 0.0 - 6500.0 (F15.13=1) 0 - 65000 (F15.13=2) s 15.00 ● F00.15 Deceleration time 1 0.00 - 650.00 (F15.13=0) 0.0 - 6500.0 (F15.13=1) 0 - 65000 (F15.13=2) s 15.00 ● F00.16 Maximum frequency 1.00~600.00/1.0~3000.0 Hz 50.00 〇 F00.17 Options of upper frequency limit control 0: set by F00.18 1：AI1 2：AI2 3: retention 4: retention 5: high frequency pulse input (X5) 6: Communication setting (percentage) 7:
Communication setting (direct frequency) 0 〇 F00.18 Upper frequency limit Lower frequency limit F00.19 to maximum frequency F00.16 Hz 50.00 ● F00.19 Lower frequency limit 0.00 to upper frequency limit F00.18 Hz 0.00 ● F00.20 Running direction 0: consistent direction 1: opposite direction 0 ● F00.21 Reverse control 0: Allow forward/reverse running 1: Prohibit reversing 0 〇 F00.22 Duration of forward and reverse dead zone 0.00～650.00 s 0.00 ● F00.23 Carrier frequency 1.0-16.0 (rated power of the inverter: 0.75-4.00kW) 1.0-10.0 (rated power of the inverter:
5.50-7.50kW) 1.0 - 8.0 (rated power of inverter 11.00 - 45.00kW) 1.0 - 4.0 (rated power of inverter 55.00 - 90.00kW) 1.0-3.0 (rated power of inverter: 110.00 and above) kHz 4.0 (0.75 and below) /2.0 ● F00.24 Automatic adjustment of carrier frequency 0: Invalid 1: valid 1 2: Valid 2 1 〇