User’s Guide for EM760 series high-performance vector inverter Encoder expansion card (PG card) For EM760 inverters, there are multiple types of general PG cards available for the user to choose according to the encoder output mode, as shown in the following table: 50 card EM760-CM-PN1 PROFINET communication card Support 100Mbps full duplex Specification and Item Encoder type supported model EM760-PG-0D1 Open collector/differential PG card It can be used in combination with a differential (line drive) output encoder, an open collector (OC) output encoder and a push-pull complementary output encoder. The maximum output is 100kHz.
The output voltage can be 5V or alternatively 12V (optional by dial-up, 5V by default) EM760-PG-0D2 Open-collector/differential PG card, with frequency dividing output It can be used in combination with a differential (line drive) output encoder, an open collector (OC) output encoder, push-pull complementary output encoder, with frequency dividing output and NPN open collector output. The maximum input is 300kHz. The output voltage can be 5V or alternatively 12V (5V by default) EM760-PG-U1 UVW differential PG card UVW differential output encoder EM760-PG-R1 Rotary transformer PG card Rotary transformer output encoder EM760-PG-S1 SinCos PG card SinCos output encoder