User’s Guide for EM760 series high-performance vector inverter 62 F03.17 Single pulse time of Y1 output 0.001~30.000 s 0.250 ● F03.18 Single pulse time of Y2 output 0.001~30.000 s 0.250 ● F03.19 Single pulse time of R1 output 0.001~30.000 s 0.250 ● F03.20 Single pulse time of R2 output 0.001~30.000 s 0.250 ● F03.21 Options of analog output M1 0: running frequency (absolute value) 1: set frequency (absolute value) 2: output torque (absolute value) 3: set torque (absolute value) 0 F03.22 Options of analog output M2 2 F03.23 Y2 high frequency pulse output function 11 4: output current 5: Output voltage 6: bus voltage 7: output power 8: AI1 9: AI2 15: length value 16: PID output 18:
PID feedback 19: PID setting 30: Communication setting 2 31: Communication setting 3 10: AI3 11: AI4 (expansion card) 12: High frequency pulse input (100.00% corresponds to the maximum frequency, and 0.00% corresponds to the minimum frequency) 13: Communication setting 1 14:
count value F03.24 Frequency corresponding to 100% of Y2 high frequency pulse output 0.00~100.00 kHz 50.00 ● F03.25 Frequency corresponding to 0% of Y2 high frequency pulse output 0.00~100.00 kHz 0.00 ● F03.26 Filtering time of Y2 high frequency pulse output 0.00~10.00 s 0.10 ● F03.27 M1 output bias -100.0~100.0 % 0.0 ● F03.28 M1 output gain -9.999~9.999 1.000 ● F03.29 M2 output bias -100.0~100.0 % 0.0 ● F03.30 M2 output gain -9.999~9.999 1.000 ● F03.31 Control logic options of PLC output terminal D7 D6 D5 D4 D3 D2 D1 D0 * R4 R3 * R2 R1 Y2 Y1 0: no output 1:
output 00000 ● F03.32 Options of R3 output function (expansion card) For details, refer to introduction to F03.02 0 F03.33 Options of R4 output function (expansion card) For details, refer to introduction to F03.02 0 F03.34 Output type selection of analog quantity M1 0: 0~10V 1: 4~20mA 2: 0~20mA 0 F03.35 Output type selection of analog quantity M2 1