User’s Guide for EM760 series high-performance vector inverter 85 30:
PLC card F16.15 Slot 2 type Same with slot 1 XXXX × F16.16 Slot 1 software S/N 1 0.00~65.335 XXXX × F16.17 Slot 1 software S/N 2 0.00~65.335 XXXX × F16.18 Slot 2 software S/N 1 0.00~65.335 XXXX × F16.19 Slot 2 software S/N 2 0.00~65.335 XXXX × F17 Virtual I/O function group (for details, refer to the user's manual or the complete function table) F18 Monitoring parameter group F18.00 Output frequency 0.00 to upper frequency limit Hz 0.00 × F18.01 Set frequency 0.00 to maximum frequency F00.16 Hz 0.00 × F18.02 PG feedback frequency 0.00 to upper frequency limit Hz 0.00 × F18.03 Estimate feedback frequency 0.00 to upper frequency limit Hz 0.00 × F18.04 Output torque -200.0~200.0 % 0.0 × F18.05 Torque setting -200.0~200.0 % 0.0 × F18.06 Output current 0.00 to 650.00 (rated power of motor:
≤ 75 kW) 0.0 to 6500.0 (rated power of motor: > 75 kW) A 0.00 × F18.07 Output current percentage 0.0-300.0 (100.0 = the rated current of inverter) % 0.0 × F18.08 Output voltage 0.0~690.0 V 0.0 × F18.09 DC bus voltage 0~1200 V 0 × F18.10 Simple PLC running times 0~10000 0 × F18.11 Simple PLC operation stage 1~15 1 × F18.12 PLC running time at the current stage 0.0~6000.0 0.0 × F18.14 Load rate 0~65535 rpm 0 × F18.15 UP/DOWN offset frequency 0.00 to 2 * Maximum frequency F00.16 Hz 0.00 × F18.16 PID setting 0.0 to PID maximum range 0.0 × F18.17 PID feedback 0.0 to PID maximum range 0.0 × F18.18 Power meter: MWh 0~65535 MWh 0 × F18.19 Watt-hour meter:
kWh 0.0~999.9 kWh 0.0 × F18.20 Output power 0.00~650.00 kW 0.00 × F18.21 Output power factor -1.000~1.000 0.000 × F18.22 Digital input terminal status 1 X5 X4 X3 X2 X1 XXX × 0/1 0/1 0/1 0/1 0/1 F18.23 Digital input terminal status 2 AI3 AI2 AI1 X5 X4 XXX × 0/1 0/1 0/1 0/1 0/1 F18.24 Digital input terminal status 3 AI4 * X10 X9 X8 XXX × * 0/1 0/1 0/1 0/1 F18.25 Output terminal state 1 * R2 R1 Y2 Y1 XXX × 0/1 0/1 0/1 0/1 0/1 F18.26 AI1 -100.0~100.0 % 0.0 × F18.27 AI2 0.0~100.0 % 0.0 ×