Technical Data Machine Centerheight ..........000000 0000000000 Distance between centers ............................... Swing overbed ....0.0. Swing over crossslide 65 mm 310mm eee 130mm ......00 000000 00000 60 mm eee 50mm (2.559”) (12.205") (5.118”) (2.362”) Travel of crossslide ......00 000000 Approx. netweight .......... 0.000 00.00 00000.0....00 .. 22 e, 55 kg (121 Ib) .........000...00................. 22mm 35mm (0.866) (MT1) (1.378") 12,5mm (0.492") Hole through work spindle ............................... 16mm Spindle hole taper .....2. 2.022 MK2 Speedrange ..... 0... 200 - 2400 rev/min (0.630") (1.969") TAILSTOCK: Center sleeve diameter Tailstock taper 2668.
Stroke of centersteeve TOOLHOLDER: max. shaftheight MK1 ...2. 00.2 ............0..000.0.............2... HEADSTOCK: (MT 2) Spindle nose according to manufacturer's standard FEED MOTORS: Stepmotor oe. 5°,50 Ncm Rapid feed PC/AT,PC/386 ............. Lee eee 700 mm/min POXT 06 ee. 350 mm/min Feed power «2... approx. 1000 N MAIN SPINDLE DRIVE: Single-phase asynchronous motor Electricsupply 6... Power (60 % dutycycle) ..0002 202 Speedn 220 V AC/50Hz/3,3A 800 W 2650 min-1 Technical modifications reserved! Due to improvements and different modifications of the individual delivery countries, illustrations may diverge from the delivered machine.
(0.37 ft.ibf) (27.559 iné/min\ (13.780 in/min) (225 ibf)