Emco Compact 5 PC — Emco Compact 5 PC CNC Lathe Software Description & User Manual PDF

Scope of Supply Dongle: Is delivered with the EMCO-software. The dongle is a software-protection (protection against unauthorized operation). If the dongle wouldn't be connected, following restrictions have to be expected: e no possibilities to store or load programs e editor locked e no possibilities to print screen hard-copies e no data-exchange to the machine Base machine Operating tools Double open-jawed spanner SW 13x17 Open-jawed spanner SW 8 Ring spanner SW 13 Hexagon socket screw key SW 8,5,4,3 Accessory: Interface cable (2): In addition a 25-pole interface cable is necessary for the operation of the machine to connect the machine to the PC.

(Not included in the scope of supply!) Setting-Up Piace the machine to a_ Recommended height approx. 650 T Connection stable table. mm (25"*). 2 of the Machine Power supply Plug in mains cable (1). Electrical connections must professionally. receptacle A grounding be done must be available. PC connection Connect PC to the machine with the interface cable (2) via paraliel interface (connection X7 at the rear side of the machine). 8